Eco Latex
Eco Latex
Water Resistant Conding Agent for Mortar
100% Trusted by our clients
You Partner in Renovation!
As Plasticizer
Extremely good adhesion
Reduced Shrinkage
Greater Elasticity
Excellent Water Resistant
Non Toxic W.R.C. Approved
NB: Eco Latex does not re-emulsify, even in high alkaline conditions.
Total value: Pho154,000.00
Today Just Php 10,466.40 / Pail - 20 Liters
Trusted by our Clients
Eco Latex Technical Data
Description
A synthetic rubber emulsion for adding to cement mortars where good adhesion and water resistance are required
Uses
Eco Latex is a high quality emulsion that substantially increases the qualities of cement mortars such as
• Thin layer patching mortars
• Renders
• Floor Screeds
• Concrete repair mortars
• Abrasion resistant linings
• Tile fixing mortars
• Masonry mortars
Application
Surface Preparation
Concrete surfaces should be clean, sound and free from oil, grease, cement laitance and all loosely adhering particles. Absorbent surfaces should be saturated thoroughly.
Materials
Aggregates should be well graded and thoroughly washed. Sand particle sizes should correspond to the thickness of mortar to be applied and required surface finish.
2 - 5 mm
5 - 15 mm
Over 15 mm
1 - 1.0 mm
0 - 3.0 mm
0 - 7.0 mm
Dilution Rates
Eco Latex is generally added to the clean mixing water within the range 1:1 - 1:4. For all applications apart from sprayed on renders, a bonding coat of Eco Latex - water 1:1 mixed with fresh cement should be brushed into the prepared surface. Subsequently mortar application must be carried out whilst the bonding coach is still wet
Consumption
Type
Styrene Butadiene Liquid
Colour
White
Specific Gravit
1.02 kg / Liter
Shelf Life
1 years when unopened
Packaging
210 Liters / Drum
20 Liters / Pail
4 Liters / Gallon