Ecofill CTA B

Ecofill CTA B

Cementitious Plaster & Based Plaster

for Interior & Exterior Surfaces

100% Trusted by our clients

The best Plastering Product in the Market

  • Ecofill saves time. It quick and easy to apply. It increases productivity by 50%. Maximizes working space

  • Ecofill reduces wastage from sieving and application

  • Eliminates surface chipping, excessive trowel & wet foam application

  • Non-combustible and non-cracking

  • Excellent adhesion

  • Easy to mix. Simply add water

  • No need for acid treatment prior to painting.

Total value: Php 721.02

Today Just:

Php 436.60 / Bag - 25 Kg

Trusted by our Clients

Ecofill CTA B Technical Data

Description

Ecofill CTAB is a cement based, based plaster, filling and leveling plaster for concrete surfaces. It helps to correct concrete surface imperfections. Ecofill CTAB consists of finely crushed white marble and high-grade sand aggregates of constant quality and composition, modified with alkali-resistant additives.

Uses

Ecofill CTA B is applied for already smooth concrete surfaces. It is the best substitute for the non-value operation like “chipping”. Where thicker conventional plastering is required, CTA B will serve as the base plaster that holds together the substrate and the thick plaster. It also can be plaster directly straight to finished to a smooth concrete surfaces such as:

Retaining Walls

Columns

Beams

Etch

Application

Preparation of Substrate

The substrate must be clean and free from dust, oil, paint, or grease. The substrate has to be pre-wetted. Water accumulation on the surface must be avoided

Mixing

Ecofill must be mixed with clean water at the site by means of a powder drill whisk. Prepare the required water in a suitable container and then add the Ecofill into the suitable container while stirring continuously until a smooth, creamy consistency is obtained. The mixture can be applied immediately after mixing. No stand off time is required. (For water consumptionplease refer to the technical data).

Application

The whole range of Ecofill products is applied either by hand with a spatula. The coat is

leveled off to a smooth surface with a spatula.

Important

All Econtech products should not be applied on to gypsum surfaces.

Technical Data

Form

Powder

Coverage

6-7 m² at ¼ inch thickness

Adhesion to Concrete

Approx. 0.5 N / mm² depending on grade

Ph Value

Approx. 12

Storage

Store in a cool dry place

Shelf Life

12 months when unopened

Packaging

25 Kg / Bag