Ecofill Mortar

Ecofill Mortar

Cementitious Plaster

for Interior & Exterior Surfaces

100% Trusted by our clients

The best Plastering Product in the Market

  • Ecofill Fine saves time. Its quick and easy to apply. It increases productivity by 50%.

  • Eliminates surface excessive trowel & wet foam application

  • Ecofill Mortar reduces wastage from sieving and application.

  • Eliminates surface chipping, excessive trowel & wet foam application

  • Non-combustible and non-cracking

  • Excellent adhesion

  • Easy to mix. Simply add water

  • No need for acid treatment prior to painting.

Total value: Php 625.45

Today Just:

Php 466.50 / Bag - 20 Kg

Trusted by our Clients

Ecofill Mortar Technical Data

Description

Ecofill Mortar is a cement based filling and leveling plaster for concrete surfaces. It helps to correct concrete surface imperfections. Ecofill Mortar consists of finely crushed white marble and high-grade sand aggregates of constant quality and composition, modified with alkali-resistant additives.

Uses

Ecofill Mortar is a standard grade, grey color plaster ideal for columns & beams where minor corrections are required. Minor holes 2 to 4 mm deep can be filled up resulting to a very smooth finish.

Application

Preparation of Substrate

The substrate must be clean and free from dust, oil, paint, or grease. The substrate has to be pre-wetted. Water accumulation on the surface must be avoided.

Mixing

Ecofill Mortar must be mixed with clean water at the site by means of a powder drill whisk or manual mix using box and spatula. Prepare the required water in a suitable container and then add the Ecofill Mortar into the suitable container while stirring continuously until a smooth, creamy consistency is obtained. The mixture can be applied immediately after mixing. No stand off time is required. (For water consumption please refer to the technical data).

Application

Ecofill Mortar products is applied either by hand with a spatula or by steel trowel. The coat is leveled off to a smooth surface with a spatula or a steel trowel. A standing time is required for the final finishing touch to let it set for a while. Using the rule of thumb if the applied Ecofill Mortar when touch, thumb print is not deep and no traces of the products that sticks to your thumb. Wet the clean steel trowel with clean water and evenly trowel the surface for final touch. A thin lamination will appear and a smooth surface will be attained. Do not directly pour water on the surface. Avoid over trowel the surface for it will fold the thin layer lamination leaving an uneven dark marks on the surface.

Important

All Econtech products should not be applied on to gypsum surfaces.

Technical Data

Form

Powder

Coverage

15 m² at 2-3 mm thickness

Water Consumption

Approx. 5.6 liter / 20 kg bag

Relative Density

1.3 kg/liter

Adhesion to Concrete

Approx. 0.5 N / mm² depending on grade

Ph Value

Approx. 12

Storage

Store in a cool dry place

Shelf Life

12 months when unopened

Packaging

20 Kg / Bag