Ecoform Care
Ecoform Care
Chemical form Release
Compound for Pre-casters
100% Trusted by our clients
Formworks Saver
Surface Finish Quality
Enhanced Structural Strength
Improved Construction Speed
Use formworks 10x more!
Cost Efficiency
Total value: Php 70,000.00
Today Just Php 52,451.62 / Drum 210 Liters
Trusted by our Clients
Ecoform Care Technical Data
Description
Ecoform Care is a chemical agent for use on both wooden and steel moulds. Ecoform Care offers protection to both steel and timber formwork as it acts as a rust inhibitor and waterproofer.
Uses
Ecoform Care can be used with excellent effect on formwork designed to
produce all types of finishes, from fair-faced to textured. Ecoform Care has
been found to assist in the protection of equipment used on the handling and
Placing of concrete. A thin coating on Bowls, Barrows, Skips, Shovels, etc.
Will make these easier to clean and protect against corrosion.
Application
Ecoform Care can be applied by either spray, brush, or roller. Surfaces Should be clean and free from grease and old concrete.
Coverage
1 liter of Ecoform Care will cover up to 19 m² for timber and up to 30 m² for metal forms.
Caution
Ecoform Care is flammable and should not be used near naked flame
Handling Precautions
ECONTECH products are generally quite harmless, provided certain precautions normally taken when handling chemicals are observed.
Avoid contact with foodstuffs or food utensils.
Avoid prolonged skin contact.
Wear protective clothing.
In the event of contamination, wash thoroughly with water.
If the eyes or mouth are affected, wash with water immediately and obtain medical attention.
Every reasonable precaution is taken in the manufacture of our products and in the compilation of information about them but results cannot be guaranteed.
Technical Data
Type
Oild Based
Colour
Yellowish
Specific Gravity
0.8 - 0.85
Viscosity
4 cps
Flashpoint
65C
Shelflife
Unlimited in original sealed container
Packaging
210 liters / drums
20 liters / pail
4 liters / gallon