EcoMRA EB
EcoMRA EB
Emulsion Based Mould Release Agent
100% Trusted by our clients
Lowest Price in Market!
Good adhesion to the formwork
Does not re-emulsify
Undisturbed concrete
Reduces concrete contamination
Non-flammable
An effective rust inhibitor
Suitable on all types of formworks
Trusted by our Clients
EcoMRA EB Technical Data
Description
A carefully blended combination of refined mineral oils and emulsifying agents, producing a thin film stable release agent.
Without Mould Release Agent
With Mould Release Agent
Uses
Eco MRA EB, when applied to steel, plastic and timber formwork,
allows clean, fast and easy striking.
Application
One coat application by brush, roller or spray. Eco MRA EB is ready
for use and requires no mixing but adequate stirring is advisable.
New formwork should be kept dry after Eco Mould Release EB has been applied, it should be protected from rain and frost. Do not water the applied coating even when the surface is dry. Eco MRA EB should be allowed to dry before concreting takes place.
Coverage
25 m² on Timber and 60 m² on Steel
Safety Precautions
Contact with skin, eyes or mucous membrane may cause irritation. Wear gloves and goggles during the application
Ecology: Do not dispose of into water or soil but according to local
regulations
Toxicity: Non-toxic under the relevant Swiss health and safety
codes.
Transport: Non-hazardous.
Technical Data
EcoMRA EB
Eco MRA EBH
Type
Liquid
Liquid
Colour
Milky White
Milky White
Specific Gravity
1.0 Kg / Liter
0.97 Kg / Liter
Storage
Protect from direct sunlight and rain
Protect from direct sunlight and rain
Shelf Life
1 year when unopened
1 year when unopened
Packaging
210 Liters / Drum
20 Liters / Pail
4 Liters / Gallon
210 Liters / Drum
20 Liters / Pail
4 Liters / Gallon